MC10E157FNR2G
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 10E157 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Throw Configuration | SPDT |
| Propagation Delay | 550 ps |
| Family | 10E |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.55 ns |
| Number of Input Lines | 8 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 4 |
| Length | 11.505mm |
| Width | 11.505mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 10E |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | Multiplexer |
| Terminal Finish | Tin (Sn) |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
MC10E157FNR2G Overview
Due to the lack of space on the board, digital switch is provided in the 28-LCC (J-Lead).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to 0°C~85°C.Using a ±4.2V~5.7V supply voltage provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 10E series, which provide extensive application potential.Among its basic features are 28 terminations.There is a base part number of 10E157 which can also be used in order to locate the logic switch that are related to this item.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch has a total of 28 component pins.It is the end of conductors that is represented by J BEND.The supply type of this multiplexer ic is Dual.This multiplexer ic has 28 pins configured.It is mounted in the way of Surface Mount.The logic switch is a member of the 10E family.It is advisable to keep the maximum supply voltage (Vsup) at 5.7V so as to avoid some unnecessary failures.During mux switch's normal operation, -5.2V is provided with a power supply.As part of the operation of this turn signal switch, there are 1 outputs.The switches is packaged according to the way of TAPE AND REEL.It is possible to accept voltage levels through 8 input lines of multiplexers.
MC10E157FNR2G Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
Power supplies of -5.2V
8 input lines
MC10E157FNR2G Applications
There are a lot of ON Semiconductor MC10E157FNR2G Signal Switches / Multiplexers / Decoders applications.
- War field flying robot with a night vision flying camera
- Automatic Monitoring systems
- Implementing boolean functions with multiple variables
- Recording transmission
- Video transmission
- High-performance memory systems
- Logic circuits
- Microprocessor memory systems
- Decimal decoder
- VGA
