banner_page

MC10E164FNR2

28 Terminations±4.2V~5.7V Signal switch10E Series 1 Outputs1 Functions


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-MC10E164FNR2
  • Package: 28-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 568
  • Description: 28 Terminations±4.2V~5.7V Signal switch10E Series 1 Outputs1 Functions(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 28-LCC (J-Lead)
Surface Mount YES
Operating Temperature 0°C~85°C
Packaging Tape & Reel (TR)
Series 10E
JESD-609 Code e0
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
Type Multiplexer
Terminal Finish TIN LEAD
Additional Feature NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V
Technology ECL
Voltage - Supply ±4.2V~5.7V
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 28
JESD-30 Code S-PQCC-J28
Number of Outputs 1
Qualification Status COMMERCIAL
Circuit 1 x 16:1
Supply Voltage-Max (Vsup) 5.7V
Supply Voltage-Min (Vsup) 4.2V
Family 10E
Number of Inputs 16
Output Characteristics OPEN-EMITTER
Output Polarity COMPLEMENTARY
Voltage Supply Source Dual Supply
Independent Circuits 1
Height Seated (Max) 4.57mm
RoHS Status Non-RoHS Compliant

MC10E164FNR2 Overview


For the purpose of saving board space, digital switch is included in the 28-LCC (J-Lead).The package is packaged in the manner of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Multiplexer.As long as the operating temperature is 0°C~85°C, turn signal switch will not be influenced by external factors.A supply voltage of ±4.2V~5.7V provides digital controlled switch's superior flexibility for designers.Multiplexers from the 10E series can be used in a wide range of applications.The basic configuration of this system includes 28 terminations.The multiplexer's system works with 5V voltage.Signal switch has 28 component pins.It is the end of conductors that is represented by J BEND.The 10E family includes the logic switch.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4.2V.Vsup (maximum supply voltage) should be kept as 5.7V to prevent unnecessary failures.For the turn signal switch's operation, there are 1 outputs.There are 16 inputs provided in this multiplexer.In addition, it provides improved features of NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V.

MC10E164FNR2 Features


Supplied in the 28-LCC (J-Lead) package
NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V

MC10E164FNR2 Applications


There are a lot of Rochester Electronics, LLC MC10E164FNR2 Signal Switches / Multiplexers / Decoders applications.

  • Time division multiplexing system
  • High-performance memory-decoding applications
  • Make half adder
  • CPU memory location identification
  • A/D converters
  • Data bus control
  • Frequency multiplexing system
  • Control unit of Central Processing unit (CPU)
  • Idle motor
  • Telephone network

Write a review

Note: HTML is not translated!
    Bad           Good