MC10E164FNR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10E164 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Circuit | 1 x 16:1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Propagation Delay | 1.1 ns |
| Family | 10E |
| Logic Function | Multiplexer, Mux |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.85 ns |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 16 |
| Voltage Supply Source | Dual Supply |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10E164FNR2G Overview
For the purpose of saving board space, digital switch is included in the 28-LCC (J-Lead).As a result, it is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to 0°C~85°C.When digital controlled switch operates at ±4.2V~5.7V, designers are provided with a greater degree of flexibility.Multiplexers in the 10E series are suitable for a wide range of applications.It is designed with 28 terminations as part of its basic configuration.To find signal switch's related components, a base part number of 10E164 may also be used.The multiplexer's system is powered by 5V volts.Currently, this turn signal switch has a total of 28 component pins.At the end of a conductor, it uses J BEND as the point where the conductor ends.Dual is used as its supply type.A total of 28 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch object belongs to the family of 10E.The minimal supply voltage (Vsup) should be kept at 4.2V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 5.7V in order to prevent some unnecessary failures.There is a power supply provided for the mux switch's normal operation of -5.2V.In order for the turn signal switch to work, there are 1 outputs.The switches package is packaged in accordance with TAPE AND REEL.On the multiplexers, 16 input lines are provided for accepting voltage levels.The characteristics of NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V are also improved.
MC10E164FNR2G Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
Power supplies of -5.2V
16 input lines
NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V
MC10E164FNR2G Applications
There are a lot of ON Semiconductor MC10E164FNR2G Signal Switches / Multiplexers / Decoders applications.
- Data distribution
- Microprocessor memory systems
- Implementing boolean functions with multiple variables
- Make full adder
- Robotic vehicles
- High-performance memory systems
- HD surveillance system
- Microprocessor instruction decoding
- Seven segment displays
- High-performance memory-decoding applications
