MC10E1651FN
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| Series | MOSAIC III™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Technology | ECL |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC10E1651 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Differential, ECL |
| Number of Elements | 2 |
| Min Supply Voltage | 5V |
| Nominal Supply Current | 50mA |
| Output Current | 100mA |
| Max Supply Current | 50mA |
| Number of Bits | 1 |
| Propagation Delay | 1.075 ns |
| Quiescent Current | 50mA |
| Family | 10E |
| Output Current per Channel | 50mA |
| Output Polarity | COMPLEMENTARY |
| Hysteresis | 27mV |
| Height Seated (Max) | 4.57mm |
| Length | 8.965mm |
| Width | 8.965mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10E1651FN Overview
The product is packaged in 20-LCC (J-Lead) in order to facilitate transportation.Output type of this comparator is Differential, ECL .The chip is packaged with Tube .The comparator has a total of 20 terminals.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.When it comes to types, this comparator is a typical with Latch .There are a total of 2 elements in it.The device contains 20 pins.The recommended mounting type is Surface Mount .A temperature setting of 0°C~85°C should be used for the operating temperature in order to prevent malfunctions.There are 20 pins on the comparator.You may wish to search MC10E1651 for more solutions that address your specific needs.The comparator presents a quiescent current of 50mA volts.The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires a nominal supply current of 50mA .An excess of current supply over 50mA could result in malfunction of the comparator.Using a voltage as low as 5V is possible for this comparator.A comparator part from the MOSAIC III? series is used in this part.
MC10E1651FN Features
Differential, ECL output capability
with Latch IC
Employing 2 elements
Operates under 0°C~85°C
Quiescent Current: 50mA
MC10E1651FN Applications
There are a lot of ON Semiconductor MC10E1651FN linear comparators applications.
- Factory automation & control
- Ultra-Low Power Systems
- Battery-Powered Electronics
- Wearable Devices
- Analog front end
- Power management
- Limit Comparators
- Set Top Boxes
- High-Speed Differential Line Receiver
- Building automation
