MC10E1652FNG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 18 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | MOSAIC III™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | with Latch |
| Terminal Finish | Tin (Sn) |
| Technology | ECL |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC10E1652 |
| Pin Count | 20 |
| Output Type | Differential, ECL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5V |
| Min Supply Voltage | -5.2V |
| Nominal Supply Current | 50mA |
| Output Current | 100mA |
| Max Supply Current | 50mA |
| Number of Bits | 1 |
| Propagation Delay | 925 ps |
| Quiescent Current | 50mA |
| Response Time | 475 ps |
| Family | 10E |
| Halogen Free | Halogen Free |
| Output Current per Channel | 50mA |
| Output Polarity | COMPLEMENTARY |
| Hysteresis | 27mV |
| Current - Output (Typ) | 100mA |
| Height Seated (Max) | 4.57mm |
| Length | 8.965mm |
| Width | 8.965mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10E1652FNG Overview
The product is packaged in 20-LCC (J-Lead) for ease of transportation.Output type Differential, ECL is used for this comparator.The part will be shipped by Tube .The comparator has a total of 20 terminals.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.The type of the chip can be classified as with Latch .The device is equipped with 20 pins.A Surface Mount mounting type is recommended.If you want to avoid malfunction, you should set the operating temperature to 0°C~85°C .The comparator has a pin count of 20 .Alternatively, you may search for MC10E1652 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 50mA volts.Normal use of the device should require a nominal supply current of 50mA .An excess of current supply over 50mA could result in malfunction of the comparator.5V is the maximum supply voltage of the comparator.There is a minimum supply voltage of -5.2V for this comparator.The part is from MOSAIC III? comparator series.
MC10E1652FNG Features
Differential, ECL output capability
with Latch IC
Operates under 0°C~85°C
Quiescent Current: 50mA
MC10E1652FNG Applications
There are a lot of ON Semiconductor MC10E1652FNG linear comparators applications.
- High-Speed Differential Line Receiver
- Building automation
- Appliances
- Power Supervision
- Zero-Crossing Detectors
- Alarm and Monitoring Circuits
- Ultra-Low Power Systems
- Industrial
- General-Purpose Portable Devices
- RC Timers
