banner_page

MC10E1652FNR2G

Surface Mount Tape & Reel (TR) 100mA mA 475 ps μs Linear Comparators 2005 50mA μA


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC10E1652FNR2G
  • Package: 20-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 644
  • Description: Surface Mount Tape & Reel (TR) 100mA mA 475 ps μs Linear Comparators 2005 50mA μA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status LAST SHIPMENTS (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 20-LCC (J-Lead)
Surface Mount YES
Number of Pins 20
Operating Temperature 0°C~85°C
Packaging Tape & Reel (TR)
Published 2005
Series MOSAIC III™
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 20
Type with Latch
Terminal Finish Tin (Sn)
Technology ECL
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MC10E1652
Pin Count 20
Output Type Differential, ECL
Number of Elements 2
Min Supply Voltage 5V
Nominal Supply Current 50mA
Output Current 100mA
Max Supply Current 50mA
Number of Bits 1
Quiescent Current 50mA
Response Time 475 ps
Family 10E
Halogen Free Halogen Free
Output Current per Channel 50mA
Output Polarity COMPLEMENTARY
Propagation Delay (tpd) 1.075 ns
Hysteresis 27mV
Height Seated (Max) 4.57mm
Length 8.965mm
Width 8.965mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

MC10E1652FNR2G Overview


In order to make transportation easier, it is packaged in 20-LCC (J-Lead) .The comparator has a Differential, ECL output.This package has been designed with Tape & Reel (TR) .The comparator has 20 terminals.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator is possible to classify the chip as with Latch .This element consists of 2 elements in total.There are 20 pins on this board.Electronic comparator is recommended that you mount the device using type Surface Mount .Ideally, the operating temperature should be set at 0°C~85°C in order to prevent malfunction.The comparator has a pin count of 20 .You can search MC10E1652 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 50mA .Electronic comparator is recommended that the nominal supply current for the device be set to 50mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 50mA .A voltage of 5V is the minimum supply voltage allowed by this comparator.Comparator electronics is part of the MOSAIC III? comparator series.

MC10E1652FNR2G Features


Differential, ECL output capability
with Latch IC
Employing 2 elements
Operates under 0°C~85°C
Quiescent Current: 50mA

MC10E1652FNR2G Applications


There are a lot of ON Semiconductor MC10E1652FNR2G linear comparators applications.

  • Laptop Computers
  • High-Speed Differential Line Receiver
  • Mobile Phones
  • Mobile Phones and Tablets
  • General Purpose Low Voltage Applications
  • Analog front end
  • Window Comparators
  • Multivibrators and High-Voltage Digital Logic Gates
  • General-Purpose, Low-Voltage Applications
  • Portable and Battery-Powered Systems

Write a review

Note: HTML is not translated!
    Bad           Good