MC10E171FN
| Parameters | |
|---|---|
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10E171 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 3 x 4:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Number of Bits | 3 |
| Propagation Delay | 650 ps |
| Family | 10E |
| Logic Function | Mux |
| Number of Inputs | 12 |
| Output Characteristics | OPEN-EMITTER |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.65 ns |
| Power Supply Current-Max (ICC) | 67mA |
| Number of Input Lines | 4 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| Series | 10E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer/Demultiplexers |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.5V -4.2V~-5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
MC10E171FN Overview
This is a relatively small item of digital switch that is included in the 28-LCC (J-Lead) in order to save space on the board.The package is in the form of Tube.digital switch ic uses the method of Surface Mount for mounting.For the analog part of the multiplexers, an IC Differential Digital Multiplexer is used.A temperature of 0°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility using digital controlled switch when it works with 4.2V~5.5V -4.2V~-5.5V voltage.Multiplexers from the 10E series can be used in a wide range of applications.There are 28 terminations included in its basic configuration.The base part number is 10E171, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 5V voltage.Currently, this turn signal switch has a total of 28 component pins.Conductors terminate at J BEND in this design.There is a type of supply Dual that is employed in this case.It is configured with 28 pins.The multiplexer ic is mounted in the direction of Surface Mount.In the 10E family, the logic switch is included.As a result, signal multiplexer provides a total of 3 bits.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.In order to maintain mux switch's normal operation, power is provided to -5.2V.This turn signal switch has 1 outputs designed for its operation.This is an the digital switch ic that is classified as Multiplexer/Demultiplexers.The multiplexer provides 12 inputs.The multiplexers have 4 input lines used to accept voltage levels.
MC10E171FN Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
Power supplies of -5.2V
4 input lines
MC10E171FN Applications
There are a lot of ON Semiconductor MC10E171FN Signal Switches / Multiplexers / Decoders applications.
- Microprocessor memory systems
- Make half adder
- Decimal decoder
- Telephone network
- HDMI applications
- To select different task for memory in microprocessor memory systems
- PCIe
- Automatic Monitoring systems
- War field flying robot with a night vision flying camera
- Image transmission
