Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-LCC (J-Lead) |
Number of Pins |
28 |
Operating Temperature |
0°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
Series |
10E |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
28 |
Type |
Differential Digital Multiplexer |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Multiplexer/Demultiplexers |
Packing Method |
TAPE AND REEL |
Technology |
ECL |
Voltage - Supply |
4.2V~5.5V -4.2V~-5.5V |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
3 |
Supply Voltage |
5V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
10E171 |
Pin Count |
28 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Circuit |
3 x 4:1 |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
-5.2V |
Number of Bits |
3 |
Propagation Delay |
650 ps |
Family |
10E |
Logic Function |
Mux |
Number of Inputs |
12 |
Output Characteristics |
OPEN-EMITTER |
Supply Type |
Dual |
Output Polarity |
COMPLEMENTARY |
Prop. Delay@Nom-Sup |
0.65 ns |
Power Supply Current-Max (ICC) |
67mA |
Number of Input Lines |
4 |
Voltage Supply Source |
Dual Supply |
Independent Circuits |
1 |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MC10E171FNR2 Overview
It is included in the 28-LCC (J-Lead) in order to save board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.The multiplexers uses an analog IC Differential Digital Multiplexer as the analog part of the circuit.If the operating temperature is maintained at 0°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 4.2V~5.5V -4.2V~-5.5V voltage.With the 10E series, the multiplexers are suitable for a diverse range of applications.Among its basic configurations are 28 terminations.The base part number is 10E171, which is also useful when looking up signal switch's related components.The multiplexer's system is supplied with a voltage of 5V.Currently, this turn signal switch has a total of 28 component pins.As a result, J BEND represents the end of the conductors.As a type of supply, Dual is employed.This multiplexer ic is configured with 28 pins.The mounting point is Surface Mount.The logic switch belongs to the family of 10E.In this signal multiplexer, there are 3 bits that are provided.The maximal supply voltage (Vsup) should be kept at 5.5V to avoid some unnecessary failures.In order for -5.2V to operate normally, a power supply is provided.The turn signal switch operates with 1 outputs.The part belongs to the Multiplexer/Demultiplexers category of signal switches.This multiplexer has a total of 12 inputs.According to TAPE AND REEL, the switches is packaged.In order to accept voltage levels, the multiplexers have input lines 4 on the board.
MC10E171FNR2 Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
Power supplies of -5.2V
4 input lines
MC10E171FNR2 Applications
There are a lot of ON Semiconductor MC10E171FNR2 Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Communication system
- RF-based home automation system
- Speed control of medern motors
- Recording transmission
- Transmission from the computer system of a satellite
- Time division multiplexing system
- Frequency multiplexing system
- Night vision cameras
- Automation system