Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-LCC (J-Lead) |
Number of Pins |
28 |
Operating Temperature |
0°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
Series |
10E |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
28 |
Type |
Differential Digital Multiplexer |
Terminal Finish |
Tin (Sn) |
Subcategory |
Multiplexer/Demultiplexers |
Packing Method |
TAPE AND REEL |
Technology |
ECL |
Voltage - Supply |
4.2V~5.5V -4.2V~-5.5V |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
10E171 |
Pin Count |
28 |
Number of Outputs |
1 |
Circuit |
3 x 4:1 |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
-5.2V |
Number of Bits |
3 |
Propagation Delay |
650 ps |
Family |
10E |
Logic Function |
Multiplexer, Mux |
Number of Inputs |
12 |
Output Characteristics |
OPEN-EMITTER |
Halogen Free |
Halogen Free |
Supply Type |
Dual |
Output Polarity |
COMPLEMENTARY |
Prop. Delay@Nom-Sup |
0.65 ns |
High Level Output Current |
-50mA |
Low Level Output Current |
50mA |
Power Supply Current-Max (ICC) |
67mA |
Number of Input Lines |
4 |
Voltage Supply Source |
Dual Supply |
Independent Circuits |
1 |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
MC10E171FNR2G Overview
In order to save board space, digital switch is located in the 28-LCC (J-Lead).Tape & Reel (TR) is the method used for packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC is indicated by Differential Digital Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at 0°C~85°C.When digital controlled switch operates at 4.2V~5.5V -4.2V~-5.5V, designers are provided with a greater degree of flexibility.As a member of 10E series, the multiplexers can be used for a wide range of applications.As parts of its basic configuration, 28 terminations are desgined.In addition, it also has a base part number of 10E171, which can be used to find related parts.The multiplexer is supplied with 5V voltage.Signal switch has 28 component pins.As a result, J BEND represents the end of the conductors.The supply type of this multiplexer ic is Dual.Currently, it is configured with 28 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch is included into the family of 10E.Signal multiplexer consists of 3 bits.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.mux switch's normal operation requires the power supply of -5.2V.The turn signal switch operates with 1 outputs.The digital switch ic is a part of an electronic system classified as Multiplexer/Demultiplexers.A multiplexer such as this has 12 inputs available.According to TAPE AND REEL, the switches is packaged.As a voltage level input, the multiplexers have 4 lines.
MC10E171FNR2G Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
Power supplies of -5.2V
4 input lines
MC10E171FNR2G Applications
There are a lot of ON Semiconductor MC10E171FNR2G Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Medical industry
- Analog, digital or video signal switching
- Electronic circuits
- Relay
- Recording transmission
- Frequency multiplexing system
- Arithmetic Logic Units
- Small scale TV wall
- Control unit of Central Processing unit (CPU)