banner_page

MC10E175FN

D-Type, Latch 4.2V~5.5V 9 Bits Standard Latches 10E Series 10E175 28 Pins QUAD ECL 28-LCC (J-Lead)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC10E175FN
  • Package: 28-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 542
  • Description: D-Type, Latch 4.2V~5.5V 9 Bits Standard Latches 10E Series 10E175 28 Pins QUAD ECL 28-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-LCC (J-Lead)
Number of Pins 28
Operating Temperature 0°C~85°C
Packaging Tube
Published 2006
Series 10E
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 28
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory FF/Latches
Technology ECL
Voltage - Supply 4.2V~5.5V
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number 10E175
Pin Count 28
Qualification Status Not Qualified
Output Type Standard
Circuit 9:9
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Number of Circuits 3
Nominal Supply Current 132mA
Number of Bits 9
Propagation Delay 975 ps
Quiescent Current 110mA
Turn On Delay Time 800 ps
Family 10E
Logic Function D-Type, Latch
Output Characteristics OPEN-EMITTER
Logic Type D-Type Transparent Latch
Trigger Type LOW LEVEL
High Level Output Current 50mA
Low Level Output Current 50mA
Number of Input Lines 2
Independent Circuits 1
fmax-Min 700 MHz
Height Seated (Max) 4.57mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MC10E175FN Overview


The 28-LCC (J-Lead) package contains it. A package of Tube has been used. There is a Standard output configured. This electrical device has the logic type D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. It operates with a supply voltage of 4.2V~5.5V. It operates at 0°C~85°C degrees Celsius. There are a number of FPGAs in this series, including this one. 9 Bits are used in the design of this electronic part. A device such as this has 28 terminations designed. It is a member of the 10E175 family. It operates with a supply voltage of 5V. It has 28 pins that makes it easy to use. In the world of electronics, this electronic device belongs to the family of 10E. There are 28 pins on it. The electronic part is mounted using the Surface Mount method. In the subcategory FF/Latches, this part belongs. When Vsup reaches 5.5V, the maximal supply voltage is reached. An electronic circuit can be found on 2 input lines. The current consumed by the device is 110mA volts in quiescent mode, which cannot be affected by external factors. 3 circuits are used to provide this superior level of flexibility. There is 50mA low level output current set. 50mA represents the high level output current.

MC10E175FN Features


28-LCC (J-Lead) package
10E series
9 Bits
10E175 family
28 pin count
28 pins

MC10E175FN Applications


There are a lot of ON Semiconductor MC10E175FN Latches applications.

  • Parallel data storage
  • Lamp and Display (LED)
  • Parallel Input
  • Serial Input
  • TV Set-top Boxes
  • Four-bit storage with output enable
  • Digital bus buffer
  • Relay replacement
  • Counter
  • Automatic test equipment

Write a review

Note: HTML is not translated!
    Bad           Good