MC10E175FNR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10E175 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Circuits | 3 |
| Nominal Supply Current | 132mA |
| Number of Bits | 9 |
| Propagation Delay | 975 ps |
| Quiescent Current | 110mA |
| Turn On Delay Time | 800 ps |
| Family | 10E |
| Logic Function | D-Type, Latch |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | D-Type Transparent Latch |
| Trigger Type | LOW LEVEL |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| fmax-Min | 700 MHz |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10E175FNR2 Overview
A package called 28-LCC (J-Lead) contains it. A Tape & Reel (TR) package is used to package it. In its configuration, Standard is used as the output. This electrical device has the logic type D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. A 4.2V~5.5V supply voltage is required to operate it. A temperature of 0°C~85°C is set as the operating temperature. The 10E series contains FPGAs of this type. An electronic part with 9 bits is designed. As far as this device is concerned, it has no terminations. The family in which it belongs to is 10E175. A 5V voltage supply is required for operation. 28 pins are provided. In terms of electronic devices, this one is in the 10E family. With the design of the board, there are only 28 pins. The electronic part is mounted using the Surface Mount method. There is a subcategory of FF/Latches for this part. It reaches a maximum supply voltage (Vsup) of 5.5V. It contains 2 input lines where electronic circuits are present. Its reliable performance makes it an excellent choice for TAPE AND REEL. Aquiescent current is consumed by 110mA without being affected by external forces. Its superior flexibility is achieved by using 3 circuits.
MC10E175FNR2 Features
28-LCC (J-Lead) package
10E series
9 Bits
10E175 family
28 pin count
28 pins
MC10E175FNR2 Applications
There are a lot of ON Semiconductor MC10E175FNR2 Latches applications.
- Registers
- Hammer
- Programmable binary
- Automotive ADAS
- Data acquisition
- Accumulator Registers
- Lamp and Display (LED)
- Serial Input
- Decade counting
- Counter control
