MC10E431FNG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10E431 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 3 |
| Output Current | 50mA |
| Clock Frequency | 1.1GHz |
| Propagation Delay | 850 ps |
| Turn On Delay Time | 700 ps |
| Family | 10E |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 132mA |
| Max Input Voltage | 4.19V |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Number of Bits per Element | 1 |
| Trigger Type | Positive, Negative |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10E431FNG Overview
It is embeded in 28-LCC (J-Lead) case. The package Tubecontains it. T flip flop is configured with an output of Differential. There is a trigger configured with Positive, Negative. There is an electrical part that is mounted in the way of Surface Mount. A voltage of -4.2V~-5.7Vis required for its operation. It is operating at 0°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 10E series. A frequency of 1.1GHzshould not be exceeded by its output. There is a consumption of 132mAof quiescent energy. Currently, there are 28 terminations. It is a member of the 10E431 family. Power is supplied from a voltage of 5V volts. An electronic device belonging to the family 10Ecan be found here. It is mounted by the way of Surface Mount. This board is designed with 28pins on it. There is a clock edge trigger type of Positive Edgeon this device. It is included in FF/Latches. It reaches 5.7Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 4.2V. The superior flexibility of this circuit is achieved by using 3 circuits. A total of -5.2V power supplies are needed to run it. The output current of 50mA makes it feature maximum design flexibility. Additionally, you may refer to the additional NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V of the electronic flip flop.
MC10E431FNG Features
Tube package
10E series
28 pins
-5.2V power supplies
MC10E431FNG Applications
There are a lot of ON Semiconductor MC10E431FNG Flip Flops applications.
- Control circuits
- Computing
- Counters
- High Performance Logic for test systems
- Memory
- Instrumentation
- Single Down Count-Control Line
- 2 – Bit synchronous counter
- Balanced 24 mA output drivers
- Count Modes
