MC10E451FN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10E451 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Number of Circuits | 2 |
| Clock Frequency | 1.1GHz |
| Propagation Delay | 1.05 ns |
| Turn On Delay Time | 625 ps |
| Family | 10E |
| Current - Quiescent (Iq) | 101mA |
| Output Characteristics | OPEN-EMITTER |
| Number of Bits per Element | 6 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10E451FN Overview
In the form of 28-LCC (J-Lead), it has been packaged. As part of the package Tube, it is embedded. T flip flop uses Non-Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. A -4.2V~-5.7Vsupply voltage is required for it to operate. It is operating at a temperature of 0°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop belongs to the 10Eseries of FPGAs. A frequency of 1.1GHzshould not be exceeded by its output. A total of 1elements are contained within it. As a result, it consumes 101mA quiescent current and is not affected by external forces. There are 28 terminations,JK flip flop belongs to 10E451 family. The power supply voltage is 5V. The electronic device belongs to the 10Efamily. In this case, the electronic component is mounted in the way of Surface Mount. The 28pins are designed into the board. It has a clock edge trigger type of Positive Edge. It is included in FF/Latches. 5.7Vis the maximum supply voltage (Vsup). Using 2 circuits, it is highly flexible.
MC10E451FN Features
Tube package
10E series
28 pins
MC10E451FN Applications
There are a lot of ON Semiconductor MC10E451FN Flip Flops applications.
- Count Modes
- Cold spare funcion
- ESCC
- Frequency Dividers
- Communications
- Balanced Propagation Delays
- Modulo – n – counter
- ESD protection
- Asynchronous counter
- Set-reset capability
