MC10EL31DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 10EL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10EL31 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 590 ps |
| Turn On Delay Time | 465 ps |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 32mA |
| Trigger Type | Positive Edge |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 32mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000000Hz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10EL31DT Overview
The package is in the form of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). There is an embedded version in the package Tube. It is configured with Differentialas an output. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The supply voltage is set to -4.2V~-5.7V. In the operating environment, the temperature is -40°C~85°C TA. D-Typedescribes this flip flop. The FPGA belongs to the 10EL series. You should not exceed 2.8GHzin its output frequency. T flip flop consumes 32mA quiescent energy. Terminations are 8. Members of the 10EL31family make up this object. The power source is powered by 5V. It is mounted by the way of Surface Mount. With its 8pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. An electronic part designed with 1bits is used in this application. As soon as 5.7Vis reached, Vsup reaches its maximum value. The supply voltage (Vsup) should be maintained above 4.2V for normal operation. Due to its superior flexibility, it uses 1 circuits. As a result of its reliability, this D flip flop is ideally suited for RAIL. There are -5.2V power supplies attached to it. Furthermore, it has NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vas a characteristic. 50mAis set as the high level output current. The low level output current is set to 50mA.
MC10EL31DT Features
Tube package
10EL series
8 pins
1 Bits
-5.2V power supplies
MC10EL31DT Applications
There are a lot of ON Semiconductor MC10EL31DT Flip Flops applications.
- Computers
- Buffer registers
- Latch
- Latch-up performance
- Cold spare funcion
- Bus hold
- Reduced system switching noise
- Pattern generators
- ESD protection
- Patented noise
