MC10EL31DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 10EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EL31 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 590 ps |
| Turn On Delay Time | 465 ps |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 32mA |
| Halogen Free | Halogen Free |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 32mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000000Hz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10EL31DTR2G Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)is the way it is packaged. You can find it in the Tape & Reel (TR)package. Differentialis the output configured for it. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates with an input voltage of -4.2V~-5.7V volts. It is operating at -40°C~85°C TA. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 10ELseries FPGA. A frequency of 2.8GHzshould not be exceeded by its output. T flip flop consumes 32mA quiescent energy. Terminations are 8. You can search similar parts based on 10EL31. A voltage of 5V provides power to the D latch. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 8. In this device, the clock edge trigger type is Positive Edge. It is included in FF/Latches. The design is based on 1bits. It reaches the maximum supply voltage (Vsup) at 5.7V. The supply voltage (Vsup) should be maintained above 4.2V for normal operation. Using 1 circuits, it is highly flexible. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. It operates from -5.2V power supplies. As an additional reference, you may refer to electronic flip flop NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V.
MC10EL31DTR2G Features
Tape & Reel (TR) package
10EL series
8 pins
1 Bits
-5.2V power supplies
MC10EL31DTR2G Applications
There are a lot of ON Semiconductor MC10EL31DTR2G Flip Flops applications.
- Patented noise
- Circuit Design
- Buffered Clock
- Guaranteed simultaneous switching noise level
- Storage registers
- Event Detectors
- QML qualified product
- Registers
- Data storage
- Automotive
