MC10EL32DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 10EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EL32 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Propagation Delay | 690 ps |
| Turn On Delay Time | 690 ps |
| Reset | Asynchronous |
| Direction | Up |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-2 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 30mA |
| fmax-Min | 2600 MHz |
| Max Frequency@Nom-Sup | 2600000000Hz |
| Count Rate | 3GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EL32DR2G Overview
It is a device supplied in the 8-SOIC (0.154, 3.90mm Width) package. It is configured using 8terminations. This device is fully flexible due to the supply voltage of [0]. The device contains 1terminations. There are a total of 8 pins in all components. In this case, it is packaged as Tape & Reel (TR). There are 8 pins going on to connect other parts in the circuit. The way of Surface Mount is used to mount it. As a member of 10EL series, it is well suited for various applications. Divide-by-2is adopted as the logic type. It is recommended to set the operating temperature to -40°C~85°C. In this case, it is mounted with a Surface Mounttype. Providing a supply voltage of 4.2V~5.7Vallows it to operate more reliably. Pbfree code may result in yes. It is important to note that in regards to this electronic device, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis an extremely significant feature. There are more related parts under the 10EL32base part number. As a result of the voltage source, there is -5.2V voltage. As low as 4.2V Vsup is the minimum supply voltage. Depending on the device type, the maximum supply voltage (Vsup) can be up to 5.7V volts. The electronic part belongs to the Prescaler/Multivibrators family. There are 1 data/clock inputs configured on this device.
MC10EL32DR2G Features
Embedded in the 8-SOIC (0.154, 3.90mm Width) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
MC10EL32DR2G Applications
There are a lot of ON Semiconductor MC10EL32DR2G Counters & Dividers applications.
- SQUARE ROOT
- Control counters
- Frequency dividers
- Timing applications
- Divide-by-N counting
- Signal gating
- Programmable decade counters
- Time Out Timer for Consumer-Application Industrial Controls
- Dual Up Counters
- Communications Digital Frequency Synthesizers;
