Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2000 |
Series |
10EL |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
Terminal Finish |
Tin (Sn) |
Additional Feature |
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
Subcategory |
Prescaler/Multivibrators |
Technology |
ECL |
Voltage - Supply |
4.2V~5.7V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
10EL32 |
Pin Count |
8 |
Number of Elements |
1 |
Supply Voltage-Max (Vsup) |
5.7V |
Power Supplies |
-5.2V |
Supply Voltage-Min (Vsup) |
4.2V |
Nominal Supply Current |
30mA |
Propagation Delay |
690 ps |
Reset |
Asynchronous |
Direction |
Up |
Halogen Free |
Halogen Free |
Logic Type |
Divide-by-2 |
Output Polarity |
COMPLEMENTARY |
Trigger Type |
Positive, Negative |
fmax-Min |
2600 MHz |
Max Frequency@Nom-Sup |
2600000000Hz |
Count Rate |
3GHz |
Number of Data/Clock Inputs |
1 |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
MC10EL32DTR2G Overview
It is a device supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. The configuration of this device is based on 8terminations. This device is fully flexible due to the supply voltage of [0]. The device contains 1terminations. The total number of component pins is 8. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 8pins used to connect other components. The way of Surface Mount is used to mount it. Having been designed as a member of the 10ELseries, it is well suited for use in a wide range of applications. It is assumed that the logic type is [0]. It is recommended that the operating temperature be set to -40°C~85°C. Having a mounting type of [0], it is suitable for installation. Providing a supply voltage of 4.2V~5.7Vallows it to operate more reliably. Using the Pbfree code, the result may be yes. It is important to note that in regards to this electronic device, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis an extremely significant feature. Among its base part number [0], you will find additional parts that are related. The voltage source produces a voltage of -5.2V volts. Supply voltages can be as low as 4.2V volts (Vsup). Depending on the device type, the maximum supply voltage (Vsup) can be up to 5.7V volts. This electronic component is from the Prescaler/Multivibrators family. The data/clock inputs have been configured to [0].
MC10EL32DTR2G Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
MC10EL32DTR2G Applications
There are a lot of ON Semiconductor MC10EL32DTR2G Counters & Dividers applications.
- Up Counters
- TRUE RMS-TO-DC CONVERSION
- Clocks
- Timers
- Time-delay circuits
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Frequency dividers
- Fixed or Programmable Frequency Division
- Timing applications
- Communications Digital Frequency Synthesizers;