MC10EL33DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 10EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 4GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EL33 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Nominal Supply Current | 27mA |
| Reset | Asynchronous |
| Max Input Voltage | 4.19V |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-4 |
| Continuous Drain Current (ID) | 50mA |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 33mA |
| Count Rate | 4.2GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EL33DG Overview
A device of this type is supplied in a package of type [0]. 8 terminations are used for its configuration. Having a supply voltage of 5V enables to operate in a fully flexible manner. In this diagram, there are 1elements that are interconnected by wires. A total of 8pins are present on all components. As [0], it is packaged. A circuit is connected to other components by 8pins. The Surface Mountway is used to mount it. This device is a member of the 10ELseries and is well suited for a wide range of applications. The logic type of Divide-by-4 is adopted. Ideally, the operating temperature should be set to -40°C~85°C. Having a mounting type of [0], it is suitable for installation. By providing the supply voltage of [0], it is capable of operating more reliably. It is possible for the result to be yesin Pbfree code. Among the features of this electronic device, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vare essential. The base part number of 10EL33provides access to more related parts. Voltage from the voltage source is [0]. There is 4.2V minimum supply voltage (Vsup) for this device. Frequency 4GHzdetermines its operation. It is possible to supply voltages up to 5.7V volts (Vsup). The electronic components is from Prescaler/Multivibrators family. The device has a configuration of 1 data/clock inputs.
MC10EL33DG Features
Embedded in the 8-SOIC (0.154, 3.90mm Width) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
Frequency of 4GHz
MC10EL33DG Applications
There are a lot of ON Semiconductor MC10EL33DG Counters & Dividers applications.
- ANALOG SIGNAL PROCESSING
- SQUARE ROOT
- Fixed or Programmable Frequency Division
- Time-delay circuits
- Control counters
- Time delay circuits
- Frequency dividing circuits
- LINEARIZATION
- Digital multiplexing and demultiplexing
- Programmable decade counters
