MC10EL33DTG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 10EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 4.2GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EL33 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Nominal Supply Current | 27mA |
| Reset | Asynchronous |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-4 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 33mA |
| Number of Data/Clock Inputs | 1 |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10EL33DTG Overview
It is a device supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. There are 8 terminations used for its configuration. The supply voltage of 5V enables it operate in a fully flexible way. There are wires connecting 1elements. A total of 8pins are available on all components. It is packaged in a manner consistent with Tube. In the circuit, there are 8pins that connect other components. Surface Mountis the way in which it is mounted. Due to the fact that it is a member of the 10ELseries, it has a wide range of applications. Divide-by-4is selected as the logic type. The operating temperature should be set at -40°C~85°C. Having a mounting type of [0], it is suitable for installation. Providing a supply voltage of 4.2V~5.7Vallows it to operate more reliably. The result may be yesin terms of Pbfree code. These electronic devices have many important features, and NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis one of them. There are more related parts under the 10EL33base part number. The voltage source generates -5.2Vvoltage. Supply voltage (Vsup) can be as low as 4.2V. With a frequency of [0], it operates. Up to a maximum voltage of 5.7Vcan be supplied (Vsup). It is an electronic component of the Prescaler/Multivibrators family. The data/clock inputs have been configured to [0].
MC10EL33DTG Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
Frequency of 4.2GHz
MC10EL33DTG Applications
There are a lot of ON Semiconductor MC10EL33DTG Counters & Dividers applications.
- Timing applications
- POWER COMPUTATION
- Divide-by"N" counters/frequency synthesizers
- Divide-by-N counting
- Clocks
- Analog multiplexing and demultiplexing
- Counter control/timers
- Time delay circuits
- Fixed or Programmable Frequency Division
- Programmable decade counters
