MC10EL33DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10EL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10EL33 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Reset | Asynchronous |
| Logic Type | Divide-by-4 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 33mA |
| Count Rate | 4.2GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10EL33DTR2 Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)package is used for this device. 8 terminations are used for its configuration. The supply voltage of 5V enables it operate in a fully flexible way. In this diagram, there are 1elements that are interconnected by wires. A total of 8pins are present on all components. As a result, it is packaged in the way of a Tape & Reel (TR). In the circuit, there are 8pins that connect other parts. Surface Mountis the way in which it is mounted. As a member of the 10ELseries, it is ideal for a wide range of applications. Divide-by-4is adopted as the logic type. Ideally, the operating temperature should be set to -40°C~85°C. This device is mounted in the Surface Mountposition. By providing the supply voltage of [0], it is capable of operating more reliably. This electronic device is equipped with the following features [0]. Under its base part number of [0], you will find additional related parts. In this case, -5.2Vvoltage is generated by the voltage source. The minimum supply voltage (Vsup) is as low as 4.2V. It is possible to reach a maximum supply voltage of 5.7VV (Vsup). This electronic component is from the Prescaler/Multivibrators family. There are 1 data/clock inputs configured on this device.
MC10EL33DTR2 Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
MC10EL33DTR2 Applications
There are a lot of ON Semiconductor MC10EL33DTR2 Counters & Dividers applications.
- Communications Digital Frequency Synthesizers;
- Up Counters
- counting/frequency sy nthesizers-BCD output
- Divide-by-N counting
- Fixed and programmable counters greater than 10
- Control counters
- SQUARE ROOT
- Dual Up Counters
- Decade counter/decimal decode display (CD4017B）
- Frequency dividers
