MC10EL51DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 10EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EL51 |
| Function | Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 565 ps |
| Turn On Delay Time | 475 ps |
| Logic Function | Flip-Flop |
| Current - Quiescent (Iq) | 29mA |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Prop. Delay@Nom-Sup | 0.62 ns |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 29mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2200000000Hz |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10EL51DR2G Overview
It is embeded in 8-SOIC (0.154, 3.90mm Width) case. There is an embedded version in the package Tape & Reel (TR). Differentialis the output configured for it. It is configured with a trigger that uses Positive, Negative. Surface Mountmounts this electrical part. It operates with a supply voltage of -4.2V~-5.7V. A temperature of -40°C~85°C TAis used in the operation. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 10ELseries of FPGAs. Its output frequency should not exceed 2.8GHz Hz. It consumes 29mA of quiescent current without being affected by external factors. There are 8 terminations,You can search similar parts based on 10EL51. Power is provided by a 5V supply. In this case, the electronic component is mounted in the way of Surface Mount. This board is designed with 8pins on it. A Positive Edgeclock edge trigger is used in this device. It is included in FF/Latches. An electronic part designed with 1bits is used in this application. It reaches the maximum supply voltage (Vsup) at 5.7V. Normally, the supply voltage (Vsup) should be kept above 4.2V. The superior flexibility of this product is achieved by using 1 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The system runs on a power supply of -5.2V watts. Furthermore, it has NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vas a characteristic.
MC10EL51DR2G Features
Tape & Reel (TR) package
10EL series
8 pins
1 Bits
-5.2V power supplies
MC10EL51DR2G Applications
There are a lot of ON Semiconductor MC10EL51DR2G Flip Flops applications.
- Data Synchronizers
- Individual Asynchronous Resets
- Balanced 24 mA output drivers
- Shift Registers
- Test & Measurement
- Communications
- Patented noise
- Single Up Count-Control Line
- Convert a momentary switch to a toggle switch
- Shift registers
