MC10EL52DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EL52 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 465 ps |
| Turn On Delay Time | 365 ps |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 25mA |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Trigger Type | Positive, Negative |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 25mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2200000000Hz |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EL52DR2G Overview
It is embeded in 8-SOIC (0.154, 3.90mm Width) case. A package named Tape & Reel (TR)includes it. T flip flop uses Differentialas its output configuration. In the configuration of the trigger, Positive, Negativeis used. There is an electronic component mounted in the way of Surface Mount. A voltage of -4.2V~-5.7Vis used as the supply voltage. Currently, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 10ELseries of FPGAs. Its output frequency should not exceed 2.8GHz. As a result, it consumes 25mA quiescent current and is not affected by external forces. In 8terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 10EL52family includes it. A voltage of 5V is used to power it. Electronic part Surface Mountis mounted in the way. It is designed with 8 pins. It has a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. Flip flops designed with 1bits are used in this part. It reaches 5.7Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be kept above 4.2V for normal operation. Due to its superior flexibility, it uses 1 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. The D latch operates on -5.2V volts. Additionally, you may refer to the D latch's additional NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V. In this case, the high level output current is set to 50mA. In the low level output current setting, the current is set to 50mA.
MC10EL52DR2G Features
Tape & Reel (TR) package
10EL series
8 pins
1 Bits
-5.2V power supplies
MC10EL52DR2G Applications
There are a lot of ON Semiconductor MC10EL52DR2G Flip Flops applications.
- Data storage
- Dynamic threshold performance
- Asynchronous counter
- Registers
- Computing
- Instrumentation
- Common Clocks
- Shift Registers
- Storage Registers
- Power down protection
