MC10EL52DT
| Parameters | |
|---|---|
| Series | 10EL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10EL52 |
| JESD-30 Code | S-PDSO-G8 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 465 ps |
| Turn On Delay Time | 365 ps |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 25mA |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 25mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
MC10EL52DT Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)is the way it is packaged. D flip flop is included in the Tubepackage. T flip flop uses Differentialas the output. It is configured with a trigger that uses a value of Positive, Negative. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of -4.2V~-5.7V. In the operating environment, the temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 10EL series. You should not exceed 2.8GHzin the output frequency of the device. As a result, it consumes 25mA quiescent current and is not affected by external forces. The number of terminations is 8. Members of the 10EL52family make up this object. The power source is powered by 5V. There is an electronic component mounted in the way of Surface Mount. This device's clock edge trigger type is Positive Edge. This part is included in FF/Latches. There are 1bits in this flip flop. It reaches 5.7Vwhen the maximum supply voltage (Vsup) is applied. A normal operating voltage (Vsup) should remain above 4.2V. The superior flexibility of this product is achieved by using 1 circuits. This D flip flop is well suited for RAIL based on its reliable performance. The D latch operates on -5.2V volts. In addition, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis a characteristic of it.
MC10EL52DT Features
Tube package
10EL series
1 Bits
-5.2V power supplies
MC10EL52DT Applications
There are a lot of ON Semiconductor MC10EL52DT Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Convert a momentary switch to a toggle switch
- Parallel data storage
- Cold spare funcion
- Computers
- Consumer
- Data storage
- Control circuits
- Set-reset capability
- Data Synchronizers
