MC10EL52DTG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 10EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EL52 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 465 ps |
| Turn On Delay Time | 365 ps |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 25mA |
| Halogen Free | Halogen Free |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 25mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2200000000Hz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10EL52DTG Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)is the packaging method. It is included in the package Tube. There is a Differentialoutput configured with it. It is configured with the trigger Positive, Negative. There is an electric part mounted in the way of Surface Mount. A voltage of -4.2V~-5.7Vis required for its operation. The operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. The 10ELseries comprises this type of FPGA. You should not exceed 2.8GHzin the output frequency of the device. There is a consumption of 25mAof quiescent energy. A total of 8terminations have been recorded. Members of the 10EL52family make up this object. Power is provided by a 5V supply. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 8. This device exhibits a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. This flip flop is designed with 1 Bits. 5.7Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be maintained above 4.2V for normal operation. Using 1 circuits, it is highly flexible. In view of its reliability, this D flip flop is a good fit for RAIL. There are -5.2V power supplies attached to it. Additionally, it is characterized by NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V.
MC10EL52DTG Features
Tube package
10EL series
8 pins
1 Bits
-5.2V power supplies
MC10EL52DTG Applications
There are a lot of ON Semiconductor MC10EL52DTG Flip Flops applications.
- Patented noise
- CMOS Process
- Parallel data storage
- Differential Individual
- Memory
- Data Synchronizers
- Data storage
- Shift registers
- Communications
- Load Control
