MC10ELT25DTG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | 10ELT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10ELT25 |
| Pin Count | 8 |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Output Current | 24mA |
| Number of Bits | 1 |
| Propagation Delay | 4.1 ns |
| Turn On Delay Time | 4.1 ns |
| Logic Function | Translator |
| Halogen Free | Halogen Free |
| Output Polarity | TRUE |
| High Level Output Current | -3mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Negative Supply Voltage-Nom | -5V |
| Output Signal | TTL |
| Translator Type | Mixed Signal |
| Input Signal | ECL |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10ELT25DTG Overview
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is available for you to use.Tube is the way in which it is packaged.This output uses Non-Inverted.Level translators is the Mixed Signal type of translator that is used in this electrical device.Surface Mount is used to mount this electronic part.Electrical device with type Unidirectional channel.During operation, the temperature is set to -40°C~85°C TA.When it comes to terminating a transmission line, there are 8 terminations.Parts that are related to 10ELT25 can be identified based on its base part number.The supply voltage of this device is 5V, and it is powered by it.8 pins are present on this board.This device belongs to the 10ELT series.Level translators is designed wLevel translatorsh 8 pins.There are 1 bits in this electronic part.There is a maximum voltage of 5.5V supported.A voltage of 4.5V is the minimum supply voltage required for it to operate.Mounting this electronic component is done using the Surface Mount method.There are no channels.The output current of 24mA gives it maximum flexibility in design.High efficiency requires maintaining the supply voltage at 5V.
MC10ELT25DTG Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
8 pin count
10ELT series
8 pins
MC10ELT25DTG Applications
There are a lot of ON Semiconductor MC10ELT25DTG voltage translators & level shifters applications.
- Notebook
- General purpose I/O level shifting
- Handset
- One Fabrication Site
- UART
- Telecom
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Tablet PCs
- Advanced Driver Assistance System (ADAS)
- Extended Product-Change Notification
