MC10ELT28DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10ELT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10ELT28 |
| Pin Count | 8 |
| Output Type | Differential, Single-Ended |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 29mA |
| Output Current | 24mA |
| Number of Bits | 1 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 1.35 ns |
| Logic Function | Translator |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -3mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Output Signal | TTL, PECL |
| Translator Type | Mixed Signal |
| Input Signal | PECL, TTL |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10ELT28DG Overview
A package called 8-SOIC (0.154, 3.90mm Width) contains it.A Tube package is used to package it.The output it is configured with uses Differential, Single-Ended.Mixed Signal is the translator type of this electrical device.The electronic part is mounted in a way that corresponds to Surface Mount.The Channel type of this electrical device is Unidirectional.During operation, the temperature is set to -40°C~85°C TA.Its superior flexibility is achieved by using 1 circuits.Transmission lines can be terminated using 8 terminations to end them.Parts related to a base part number 10ELT28 are designated by the same number.In order for it to operate, it needs to be powered by a voltage of 5V.With 8 pins, it is equipped with a minimal number of connections.Level translators belongs to the series 10ELT.Level translators is designed wLevel translatorsh 8 pins.Electronic parts are designed with a number of bits of 1.Supports a voltage of 5.25V as its maximum supply voltage.A voltage of 4.75V is the minimum supply voltage required for it to operate.The way of mounting this electronic part is Surface Mount.There are 2 channels.Power comes from a 5V supply.If the supply voltage is kept at 24mA, a high level of efficiency can be achieved.A high level of efficiency is achieved by maintaining the supply voltage at 5V.
MC10ELT28DG Features
8-SOIC (0.154, 3.90mm Width) package
1 circuits
8 pin count
10ELT series
8 pins
5V power supplies
MC10ELT28DG Applications
There are a lot of ON Semiconductor MC10ELT28DG voltage translators & level shifters applications.
- UART
- Electronic Points of Sale
- Data and Clock Transmission Over Backplane
- Temperature Ranges (1)
- Telecommunications
- Debouncing a mechanical switch
- Monitors
- Personal Electronics
- Eliminate slow or noisy input signals
- Motor Drives
