MC10ELT28DTR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 10ELT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10ELT28 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Differential, Single-Ended |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Voltage | 5V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 1 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 5.5 ns |
| Logic Function | Translator |
| Halogen Free | Halogen Free |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -3mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Output Signal | TTL, PECL |
| Translator Type | Mixed Signal |
| Input Signal | PECL, TTL |
| Output Latch or Register | NONE |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10ELT28DTR2G Overview
In the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), it can be found.A package of Tape & Reel (TR) has been used.Level translators is configured wlevel translatorsh an output of Differential, Single-Ended.Its translator type is Mixed Signal.The electronic part is mounted using the Surface Mount method.There is Unidirectional channel type for this electrical device.The temperature used for operation is -40°C~85°C TA.1 circuits are used to provide this superior level of flexibility.Transmission lines can be terminated using 8 terminations to end them.Level translators is possible to determine Level translatorss related parts using the base part number 10ELT28.There is a voltage supply of 5V which powers the device.There are 8 pins on it.There are a number of devices in the 10ELT series.Level translators is designed wLevel translatorsh 8 pins.The design of this electronic part contains 1 bits.Level translators supports the maximal supply voltage of 5.25V.The minimal supply voltage is 4.75V.Electronic parts are mounted using Surface Mount.There are a total of 2 channels.In order for Level translators to operate, level translators needs a power supply of 5V.For maximum efficiency, the supply voltage should be set to 5V.
MC10ELT28DTR2G Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
1 circuits
8 pin count
10ELT series
8 pins
5V power supplies
MC10ELT28DTR2G Applications
There are a lot of ON Semiconductor MC10ELT28DTR2G voltage translators & level shifters applications.
- Eliminate slow or noisy input signals
- Controlled Baseline
- UART
- Industrial equipment
- Product Traceability
- Advanced Driver Assistance System (ADAS)
- Notebook
- TVs
- Electronic Points of Sale
- Smartphone
