MC10EP016FAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-LQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~70°C |
| Packaging | Tray |
| Published | 2005 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: 0V VCC WITH VEE = -3.0V TO -5.5V |
| Technology | ECL |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP016 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Bits | 8 |
| Propagation Delay | 650 ps |
| Turn On Delay Time | 800 ps |
| Reset | Asynchronous |
| Family | 10E |
| Logic Function | Counter |
| Max Input Voltage | 2.48V |
| Direction | Up |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Logic Type | Binary Counter |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 200mA |
| Number of Input Lines | 8 |
| Count Rate | 1.4GHz |
| Timing | Synchronous |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EP016FAG Overview
This device is supplied in the 32-LQFP package. There are 32 terminations used for its configuration. 3.3Vis fully flexible due to its voltage supply. In wires, 1elements are connected. All component pins are equal to 32. In this case, it is packaged as Tray. To connect the circuit's other components, there are 32pins. It is mounted in the direction of [0]. The 10Efamily includes it. Having been designed as a member of the 10EPseries, it is well suited to a variety of applications. The logic type of Binary Counter is adopted. The operating temperature should be set at -40°C~70°C. Having a mounting type of [0], it is suitable for installation. In the presence of the supply voltage of [0], it can operate more reliably. The device stores 8bits of information. It is possible for the result to be yesin Pbfree code. When it comes to this electronic device, NECL MODE: 0V VCC WITH VEE = -3.0V TO -5.5V are much important features. Among its base part number [0], you will find additional parts that are related. From the voltage source, there is -5.2Vvoltage. To operate, the device requires a voltage of [0]. As low as 3V Vsup is the minimum supply voltage. 1MHzis the frequency of operation. Input binary data is made by using the 8input lines.
MC10EP016FAG Features
Embedded in the 32-LQFP package
NECL MODE: 0V VCC WITH VEE = -3.0V TO -5.5V
Operating supply voltage of 5V
Frequency of 1MHz
MC10EP016FAG Applications
There are a lot of ON Semiconductor MC10EP016FAG Counters & Dividers applications.
- LINEARIZATION
- POWER COMPUTATION
- Up Counters
- Counter control/timers
- SQUARE ROOT
- Fixed or Programmable Frequency Division
- Divide-by"N" counters/frequency synthesizers
- Clocks
- Frequency division
- counting/frequency sy nthesizers-BCD output
