MC10EP139DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 10EP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Clock Generator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 1GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC10EP139 |
| Output | ECL |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -3.0/-5.5/3.3/5.0V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 83mA |
| Propagation Delay | 1.1 ns |
| Turn On Delay Time | 1.1 ns |
| Family | 10E |
| Logic Function | Clock |
| Max Input Voltage | 2.48V |
| Halogen Free | Halogen Free |
| Input | CML, NECL, PECL |
| Ratio - Input:Output | 1:4 |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Height | 1.05mm |
| Length | 6.6mm |
| Width | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EP139DTG Overview
Clock ICs are packaged using the Tube method. The 20-TSSOP (0.173, 4.40mm Width) package contains this clock generator. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. 20 terminations can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. There is a Clock PLL called CML, NECL, PECL which is designed to be the input to this clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. 5.5V would be the maximum supply voltage for this clock generator. A maximum voltage of 3V should be used for this frequency generator for safety reasons. This clock PLL works with a supply voltage of 3V~5.5V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. As the name suggests, this is a clock generator that is compatible with ECL logic levels. This electronic component is usually classified as a Clock Generator component. There is a 20-bit clock-generating IC built specifically for microprocessors in this frequency generator. The related electrical components for the base part number MC10EP139 can be found below. It is possible to connect to the PLL via 20 pins. A member of the 10EP series, this electronic component is made of plastic. 4 signal outputs allow for maximi4ation of output frequency. When searching for parts of the 10E family, similar frequency generators will be found. At a frequency of 1GHz, the system can achieve high efficiency. Input data is processed by combining clock logic function Clock.
MC10EP139DTG Features
Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
MC10EP139DTG Applications
There are a lot of ON Semiconductor MC10EP139DTG Clock Generators applications.
- Threshold extension
- FM demodulation networks for FM operations
- PCI express cards
- Peripheral devices
- FMCW Radar
- CB radios
- Signal modulation and demodulation
- Pagers
- HDD recorders
- Time to digital converters
