MC10EP29DT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 10EP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Clock Frequency | 3GHz |
| Family | 10E |
| Current - Quiescent (Iq) | 57mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.5 ns |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MC10EP29DT Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. As part of the package Tube, it is embedded. Differentialis the output configured for it. It is configured with a trigger that uses Positive, Negative. Surface Mountis occupied by this electronic component. The supply voltage is set to -3V~-5.5V. In this case, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 10EPseries FPGA. A frequency of 3GHzshould not be exceeded by its output. The list contains 2 elements. During its operation, it consumes 57mA quiescent energy. The number of terminations is 20. It is powered from a supply voltage of 3.3V. Electronic devices of this type belong to the 10Efamily. Vsup reaches 5.5V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be kept above 3V. Additionally, there are NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V on the electronic flip flop that can be referred to.
MC10EP29DT Features
Tube package
10EP series
MC10EP29DT Applications
There are a lot of Rochester Electronics, LLC MC10EP29DT Flip Flops applications.
- Test & Measurement
- Frequency Divider circuits
- EMI reduction circuitry
- Pattern generators
- Parallel data storage
- Circuit Design
- Asynchronous counter
- Counters
- Data storage
- Guaranteed simultaneous switching noise level
