MC10EP29DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10EP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP29 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Output Current | 50mA |
| Clock Frequency | 3GHz |
| Propagation Delay | 575 ps |
| Turn On Delay Time | 420 ps |
| Family | 10E |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 57mA |
| Halogen Free | Halogen Free |
| Number of Bits per Element | 1 |
| Trigger Type | Positive, Negative |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 60mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EP29DTG Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. Package Tubeembeds it. This output is configured with Differential. It is configured with a trigger that uses a value of Positive, Negative. It is mounted in the way of Surface Mount. A voltage of -3V~-5.5Vis required for its operation. A temperature of -40°C~85°C TAis used in the operation. This electronic flip flop is of type D-Type. The FPGA belongs to the 10EP series. This D flip flop should not have a frequency greater than 3GHz. There is 57mA quiescent consumption. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 10EP29 family contains this object. Power is supplied from a voltage of 3.3V volts. Electronic devices of this type belong to the 10Efamily. Electronic part Surface Mountis mounted in the way. There are 20pins on it. Its clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 3V. In order to achieve its superior flexibility, 2 circuits are used. Considering the reliability of this T flip flop, it is well suited for RAIL. The output current of 50mA makes it feature maximum design flexibility. It is also characterized by NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V. High level output current is set to -50mA. In the low level output current setting, the current is set to 50mA.
MC10EP29DTG Features
Tube package
10EP series
20 pins
MC10EP29DTG Applications
There are a lot of ON Semiconductor MC10EP29DTG Flip Flops applications.
- Single Down Count-Control Line
- Test & Measurement
- QML qualified product
- Cold spare funcion
- CMOS Process
- Individual Asynchronous Resets
- Load Control
- Guaranteed simultaneous switching noise level
- ESCC
- Shift registers
