MC10EP31D
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 10EP |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 3V~5.5V |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Clock Frequency | 3GHz |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| RoHS Status | Non-RoHS Compliant |
MC10EP31D Overview
8-SOIC (0.154, 3.90mm Width)is the packaging method. You can find it in the Tubepackage. T flip flop uses Differentialas the output. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. Powered by a 3V~5.5Vvolt supply, it operates as follows. The operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 10EP series. In order for it to function properly, its output frequency should not exceed 3GHz. There are 1 elements in it.
MC10EP31D Features
Tube package
10EP series
MC10EP31D Applications
There are a lot of Rochester Electronics, LLC MC10EP31D Flip Flops applications.
- Supports Live Insertion
- Individual Asynchronous Resets
- Differential Individual
- Communications
- Data transfer
- Storage Registers
- Count Modes
- Divide a clock signal by 2 or 4
- Event Detectors
- Modulo – n – counter
