MC10EP31DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 10EP |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10EP31 |
| JESD-30 Code | S-PDSO-G8 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 3GHz |
| Propagation Delay | 410 ps |
| Turn On Delay Time | 340 ps |
| Family | 10E |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 45mA |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 47mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000000Hz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10EP31DT Overview
The flip flop is packaged in a case of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). It is included in the package Tube. T flip flop uses Differentialas the output. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. With a supply voltage of -3V~-5.5V volts, it operates. It is operating at -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 10EP series. You should not exceed 3GHzin its output frequency. During its operation, it consumes 45mA quiescent energy. It has been determined that there have been 8 terminations. It is a member of the 10EP31 family. It is powered from a supply voltage of 3.3V. It is a member of the 10Efamily of D flip flop. There is an electronic part that is mounted in the way of Surface Mount. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. There are 1bits in its design. In this case, the maximum supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be maintained above 3V for normal operation. Its flexibility is enhanced by 1 circuits. As a result of its reliable performance, this T flip flop is suitable for RAIL. An electrical current of -5.2V volts is applied to it. As an additional reference, you may refer to electronic flip flop NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V.
MC10EP31DT Features
Tube package
10EP series
1 Bits
-5.2V power supplies
MC10EP31DT Applications
There are a lot of ON Semiconductor MC10EP31DT Flip Flops applications.
- ATE
- Control circuits
- Storage registers
- Latch
- Functionally equivalent to the MC10/100EL29
- Buffered Clock
- Frequency Dividers
- Data Synchronizers
- Balanced 24 mA output drivers
- Storage Registers
