MC10EP31DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 10EP |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10EP31 |
| JESD-30 Code | S-PDSO-G8 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 3GHz |
| Propagation Delay | 410 ps |
| Turn On Delay Time | 340 ps |
| Family | 10E |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 45mA |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 47mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000000Hz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10EP31DTR2 Overview
In the form of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), it has been packaged. The Tape & Reel (TR)package contains it. Currently, the output is configured to use Differential. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at -3V~-5.5Vvolts. The operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 10EP series. It should not exceed 3GHzin its output frequency. As a result, it consumes 45mA quiescent current. Currently, there are 8 terminations. If you search by 10EP31, you will find similar parts. Power is supplied from a voltage of 3.3V volts. It belongs to the family of electronic devices known as 10E. In this case, the electronic component is mounted in the way of Surface Mount. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This RS flip flops is a part number FF/Latches. The design is based on 1bits. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normal operation requires a supply voltage (Vsup) above 3V. The superior flexibility of this product is achieved by using 1 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. A total of -5.2V power supplies are needed to run it. In addition, NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5Vis a characteristic of it.
MC10EP31DTR2 Features
Tape & Reel (TR) package
10EP series
1 Bits
-5.2V power supplies
MC10EP31DTR2 Applications
There are a lot of ON Semiconductor MC10EP31DTR2 Flip Flops applications.
- Memory
- Balanced Propagation Delays
- Data Synchronizers
- Modulo – n – counter
- Dynamic threshold performance
- Cold spare funcion
- Computing
- Control circuits
- Digital electronics systems
- Synchronous counter
