MC10EP32DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 4GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP32 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 480 ps |
| Turn On Delay Time | 480 ps |
| Reset | Asynchronous |
| Family | 10E |
| Logic Function | Clock |
| Max Input Voltage | 2.48V |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-2 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 42mA |
| Number of Data/Clock Inputs | 1 |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EP32DG Overview
This is a device supplied in the 8-SOIC (0.154, 3.90mm Width) package. In order to configure it, it uses 8terminations. This device is fully flexible due to the supply voltage of [0]. 8is the number of pins on all components. Tubeis the packaging method used for this package. In the circuit, there are 8pins that connect other parts. The way of Surface Mount is used to mount it. In this case, it emerges as a member of the 10E family. This device is a member of the 10EPseries and is well suited for a wide range of applications. Divide-by-2is adopted as the logic type. Setting the operating temperature to -40°C~85°C is recommended. There is a mounting type of Surface Mounton this device. As a result, the device operates more reliably when a supply voltage of 3V~5.5Vis applied. Pbfree code may produce the result yes. This electronic device is equipped with the following features [0]. You can find more related parts under its base part number of 10EP32. From the voltage source, there is -5.2Vvoltage. In the case of the supply voltage (Vsup), it can be as low as 3V. There is 4GHz frequency associated with it. Up to a maximum voltage of 5.5Vcan be supplied (Vsup). The electronic part belongs to the Prescaler/Multivibrators family. Currently, it is configured with 1clock/data inputs. According to the system, there have been 1outputs sent.
MC10EP32DG Features
Embedded in the 8-SOIC (0.154, 3.90mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
Frequency of 4GHz
MC10EP32DG Applications
There are a lot of ON Semiconductor MC10EP32DG Counters & Dividers applications.
- Frequency dividers
- TRUE RMS-TO-DC CONVERSION
- LINEARIZATION
- Digital multiplexing and demultiplexing
- Divide-by"N" counters/frequency synthesizers
- VHF, UHF, FM, AM, etc.
- Programmable binary and decade
- Divide-by-N counting
- Frequency division
- SQUARING
