MC10EP32DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP32 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 480 ps |
| Reset | Asynchronous |
| Family | 10E |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-2 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 40mA |
| Max Frequency@Nom-Sup | 4000000000Hz |
| Count Rate | 4GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EP32DR2G Overview
A device of this type is supplied in a package of type [0]. In order to configure it, it uses 8terminations. Having a voltage supply of 3.3Vallows it to operate in a highly flexible manner. There are 8pins on all components. Tape & Reel (TR)is the packaging method used for this package. Circuit components are connected by 8pins. To mount it, use the method of [0]. It emerges as a member of 10E family. As a member of the 10EPseries, it is ideal for a wide range of applications. Logic type Divide-by-2 is adopted. A temperature of -40°C~85°Cshould be set for the operating environment. The mounting type is Surface Mount. Providing a supply voltage of 3V~5.5Vallows it to operate more reliably. Pbfree code may result in yes. In terms of this electronic device, the features provided by NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vare of the utmost importance. It should be noted that there are more related parts under the 10EP32base part number. Voltage from the voltage source is [0]. There is a minimum supply voltage (Vsup) of 3V volts. Up to a maximum voltage of 5.5Vcan be supplied (Vsup). In this case, the electronic components belong to the family of [0]. There are 1 data/clock inputs configured on this device. There are 1outputs sent by the system.
MC10EP32DR2G Features
Embedded in the 8-SOIC (0.154, 3.90mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
MC10EP32DR2G Applications
There are a lot of ON Semiconductor MC10EP32DR2G Counters & Dividers applications.
- Programmable decade counters
- Communications Digital Frequency Synthesizers;
- Divide-by-N counting
- counting/frequency sy nthesizers-BCD output
- Up Counters
- Frequency dividing circuits
- Fixed or Programmable Frequency Division
- Counter control/timers
- Divide-by"N" counters/frequency synthesizers
- Signal gating
