Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Weight |
157.991892mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2000 |
Series |
10EP |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
Additional Feature |
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
Subcategory |
Prescaler/Multivibrators |
Technology |
ECL |
Voltage - Supply |
3V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Frequency |
4GHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
10EP32 |
Pin Count |
8 |
Number of Elements |
1 |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
3V |
Propagation Delay |
480 ps |
Turn On Delay Time |
480 ps |
Reset |
Asynchronous |
Family |
10E |
Number of Inputs |
2 |
Max Input Voltage |
2.48V |
Halogen Free |
Halogen Free |
Logic Type |
Divide-by-2 |
Output Polarity |
COMPLEMENTARY |
Trigger Type |
Positive, Negative |
Power Supply Current-Max (ICC) |
40mA |
Number of Data/Clock Inputs |
1 |
Height |
950μm |
Length |
3.1mm |
Width |
3.1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC10EP32DTG Overview
The device is packaged in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)type. In order to configure it, it uses 8terminations. 3.3Vis fully flexible due to its voltage supply. In wires, 1elements are connected. 8is the number of pins on all components. Tubeis used to package it. In the circuit, there are 8pins that connect other components. Surface Mountis the way in which it is mounted. In this case, it emerges as a member of the 10E family. Having been designed as a member of the 10EPseries, it is well suited to a variety of applications. It is assumed that the logic type is [0]. A temperature of -40°C~85°Cshould be set for the operating environment. This device is mounted in the Surface Mountposition. When the supply voltage is set to [0], it is able to operate with greater reliability. In terms of Pbfree code, the result may be yes. In terms of this electronic device, the features provided by NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vare of the utmost importance. More related parts are available under its base part number 10EP32. It is possible to supply the device with the minimum supply voltage (Vsup) of 3V. A frequency of 4GHzis used for operation. It is possible to reach a maximum supply voltage of 5.5VV (Vsup). In this case, the electronic components belong to the family of [0]. Data and clock inputs are configured at [0]. In this case, the system has received 2 outputs.
MC10EP32DTG Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
Frequency of 4GHz
MC10EP32DTG Applications
There are a lot of ON Semiconductor MC10EP32DTG Counters & Dividers applications.
- Divide-by-N counting
- POWER COMPUTATION
- Timing applications
- Binary counter/decoder
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Signal gating
- Timers
- ANALOG SIGNAL PROCESSING
- Frequency dividing circuits
- SQUARING