MC10EP32DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP32 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 480 ps |
| Reset | Asynchronous |
| Family | 10E |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-2 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 40mA |
| Max Frequency@Nom-Sup | 4000000000Hz |
| Count Rate | 4GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EP32DTR2G Overview
It is a device supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. It is configured with 8terminations. The supply voltage of 3.3V enables it operate in a fully flexible way. In total, there are 8pins on the component. In this case, it is packaged as Tape & Reel (TR). In the circuit, there are 8pins that connect other parts. Using [0], it can be mounted. The 10Efamily is derived from it. The 10EPseries offers a wide range of applications due to its versatility. It is assumed that the logic type is [0]. Ideally, the operating temperature should be set to -40°C~85°C. Mounting type Surface Mountis used. Providing a supply voltage of 3V~5.5Vallows it to operate more reliably. Based on the Pbfree code, the result may be yes. In terms of this electronic device, the features provided by NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vare of the utmost importance. More related parts are available under its base part number 10EP32. Voltage from the voltage source is [0]. Supply voltage (Vsup) can be as low as 3V. There is 5.5V maximum supply voltage (Vsup) allowed. It is an electronic component of the Prescaler/Multivibrators family. This device is configured with 1 data/clock inputs. 1 outputs is sent by the system.
MC10EP32DTR2G Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
MC10EP32DTR2G Applications
There are a lot of ON Semiconductor MC10EP32DTR2G Counters & Dividers applications.
- Clocks
- Digital multiplexing and demultiplexing
- ALGEBRAIC COMPUTATION
- Timers
- SQUARE ROOT
- POWER COMPUTATION
- Programmable decade counters
- Time Out Timer for Consumer-Application Industrial Controls
- counting/frequency sy nthesizers-BCD output
- Fixed and programmable counters greater than 10
