MC10EP32MNR4G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 10EP |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 10EP32 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Operating Supply Current | 30mA |
| Propagation Delay | 350 ps |
| Turn On Delay Time | 480 ps |
| Reset | Asynchronous |
| Family | 10E |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-2 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 40mA |
| Max Frequency@Nom-Sup | 4000000000Hz |
| Count Rate | 4GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10EP32MNR4G Overview
In the 8-VFDFN Exposed Padpackage, it is supplied. It is configured with 8terminations. The supply voltage of 3.3V permits it to operate with full flexibility. In total, there are 8pins on the component. It is packaged in the way of Tape & Reel (TR). Circuit components are connected by 8pins. Using [0], it can be mounted. It emerges as a member of 10E family. As a member of the 10EPseries, it is ideal for a wide range of applications. In this case, the logic type is set to [0]. The operating temperature should be set at -40°C~85°C. This device is mounted in the Surface Mountposition. Providing a supply voltage of 3V~5.5Vallows it to operate more reliably. Pbfree code may produce the result yes. Among the features of this electronic device, NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vare essential. More related parts are available under its base part number 10EP32. The voltage source produces -5.2Vvoltage. As low as 3V Vsup is the minimum supply voltage. There is 5.5V maximum supply voltage (Vsup) allowed. Prescaler/Multivibratorsis the family name of the electronic part. Inputs for data and clock are set to [0]. There are 1 outputs sent by the system.
MC10EP32MNR4G Features
Embedded in the 8-VFDFN Exposed Pad package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
MC10EP32MNR4G Applications
There are a lot of ON Semiconductor MC10EP32MNR4G Counters & Dividers applications.
- MULTIPLICATION
- ANALOG SIGNAL PROCESSING
- Divide-by"N" counters/frequency synthesizers
- Timers
- Frequency division
- Fixed or Programmable Frequency Division
- Time delay circuits
- SQUARE ROOT
- Fixed and programmable counters greater than 10
- Divide-by-N counting
