MC10EP33DR2
| Parameters | |
|---|---|
| fmax-Min | 2500 MHz |
| Max Frequency@Nom-Sup | 4000000000Hz |
| Count Rate | 4GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10EP |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10EP33 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Reset | Asynchronous |
| Family | 10E |
| Logic Type | Divide-by-4 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.44 ns |
| Power Supply Current-Max (ICC) | 34mA |
MC10EP33DR2 Overview
In the 8-SOIC (0.154, 3.90mm Width)package, it is supplied. This configuration uses 8terminations. The supply voltage of 3.3V permits it to operate with full flexibility. An interconnection of 1elements is provided by wires. The total number of component pins is 8. As [0], it is packaged. In the circuit, there are 8pins that connect other components. It is mounted in the manner of [0]. It is a member of the family [0]. The 10EPseries is well suited to a number of uses. A logic type of Divide-by-4 is adopted. It is recommended that the operating temperature be set to -40°C~85°C. Mounting type Surface Mountis used. In the case of a supply voltage of [0], it operates more reliably. A major feature of this electronic device is its [0]. You can find more related parts under its base part number of 10EP33. As a result of the voltage source, there is -5.2V voltage. It is possible to supply the device with the minimum supply voltage (Vsup) of 3V. It is possible to provide a voltage up to 5.5V (Vsup). This electronic part belongs to the Prescaler/Multivibrators family. Data and clock inputs are configured at [0].
MC10EP33DR2 Features
Embedded in the 8-SOIC (0.154, 3.90mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
MC10EP33DR2 Applications
There are a lot of ON Semiconductor MC10EP33DR2 Counters & Dividers applications.
- Frequency division
- Timing applications
- POWER COMPUTATION
- Frequency dividers
- Communications Digital Frequency Synthesizers;
- SQUARING
- ALGEBRAIC COMPUTATION
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Binary counter/decoder
- Analog multiplexing and demultiplexing
