MC10EP33DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 4GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP33 |
| Pin Count | 8 |
| Operating Supply Voltage | 5.5V |
| Number of Elements | 1 |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Reset | Asynchronous |
| Family | 10E |
| Max Input Voltage | 2.48V |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-4 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.44 ns |
| Power Supply Current-Max (ICC) | 34mA |
| Number of Data/Clock Inputs | 1 |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EP33DTG Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)is a package in which this device is packaged. In order to configure it, it uses 8terminations. This device is fully flexible due to the supply voltage of [0]. 1 elements are interconnected in wires. There are 8pins on all components. Tubeis the packaging method used for this package. Circuit components are connected by 8pins. It is mounted using the way of [0]. It emerges as a member of 10E family. Due to the fact that it is a member of the 10EPseries, it has a wide range of applications. Divide-by-4is used as the logic type. -40°C~85°Cshould be set as the operating temperature. A mounting type of Surface Mountis adopted. It is able to operate with higher reliability when the supply voltage of 3V~5.5V is provided. In terms of Pbfree code, the result may be yes. These electronic devices have many important features, and NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vis one of them. More related parts are available under its base part number 10EP33. From the voltage source, there is -5.2Vvoltage. In order for it to operate, it requires a supply voltage of 5.5V . It is possible to supply the device with the minimum supply voltage (Vsup) of 3V. It operates at a frequency of 4GHz Hz. The electronic part belongs to the Prescaler/Multivibrators family. The data/clock inputs have been configured to [0].
MC10EP33DTG Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
Operating supply voltage of 5.5V
Frequency of 4GHz
MC10EP33DTG Applications
There are a lot of ON Semiconductor MC10EP33DTG Counters & Dividers applications.
- Communications Digital Frequency Synthesizers;
- Counter control/timers
- ALGEBRAIC COMPUTATION
- VHF, UHF, FM, AM, etc.
- Control counters
- Up Counters
- POWER COMPUTATION
- SQUARE ROOT
- ANALOG SIGNAL PROCESSING
- Time-delay circuits
