MC10EP35DG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | JK Type |
| Terminal Finish | MATTE TIN |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDSO-G8 |
| Function | Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Bits | 2 |
| Clock Frequency | 3GHz |
| Family | 10E |
| Current - Quiescent (Iq) | 50mA |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 0.49 ns |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MC10EP35DG Overview
It is packaged in the way of 8-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. T flip flop is configured with an output of Differential. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of -3V~-5.5V volts, it operates. A temperature of -40°C~85°C TAis used in the operation. The type of this D latch is JK Type. In terms of FPGAs, it belongs to the 10EP series. You should not exceed 3GHzin its output frequency. In total, it contains 1 elements. T flip flop consumes 50mA quiescent energy. There have been 8 terminations. Power is supplied from a voltage of 3.3V volts. It belongs to the family of electronic devices known as 10E. There are 2bits in this flip flop. Vsup reaches 5.5V, the maximal supply voltage. Normally, the supply voltage (Vsup) should be above 3V. In addition, you can refer to the additinal NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V of the D latch.
MC10EP35DG Features
Tube package
10EP series
2 Bits
MC10EP35DG Applications
There are a lot of Rochester Electronics, LLC MC10EP35DG Flip Flops applications.
- Supports Live Insertion
- Automotive
- Safety Clamp
- Frequency division
- Matched Rise and Fall
- ATE
- ESD protection
- Parallel data storage
- Shift Registers
- Balanced Propagation Delays
