MC10EP451MNG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Shift Registers |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP451 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Bits | 6 |
| Clock Frequency | 3GHz |
| Propagation Delay | 550 ps |
| Turn On Delay Time | 650 ps |
| Family | 10E |
| Current - Quiescent (Iq) | 125mA |
| Halogen Free | Halogen Free |
| Trigger Type | Positive Edge |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 6 |
| Count Direction | RIGHT |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000000Hz |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10EP451MNG Overview
32-VFQFN Exposed Padis the way it is packaged. D flip flop is included in the Tubepackage. T flip flop is configured with an output of Differential. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. A -3V~-5.5Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 10EP series. A frequency of 3GHzshould not be exceeded by its output. A total of 1elements are contained within it. It consumes 125mA of quiescent There are 32 terminations,The 10EP451 family contains it. The power supply voltage is 3.3V. It is a member of the 10Efamily of D flip flop. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 32. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to Shift Registers base part number. 6bits are used in its design. It reaches the maximum supply voltage (Vsup) at 5.5V. The supply voltage (Vsup) should be maintained above 3V for normal operation. It operates from -5.2V power supplies. A total of 6input lines have been provided. Furthermore, it has NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vas a characteristic. A -50mAvalue is set for the high level output current. In the low level output current setting, 50mAis used.
MC10EP451MNG Features
Tube package
10EP series
32 pins
6 Bits
-5.2V power supplies
MC10EP451MNG Applications
There are a lot of ON Semiconductor MC10EP451MNG Flip Flops applications.
- Load Control
- Data storage
- ESD protection
- Balanced 24 mA output drivers
- Functionally equivalent to the MC10/100EL29
- Safety Clamp
- Single Down Count-Control Line
- Test & Measurement
- Pattern generators
- Buffered Clock
