MC10EP451MNR4G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Shift Registers |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP451 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Bits | 6 |
| Clock Frequency | 3GHz |
| Propagation Delay | 550 ps |
| Turn On Delay Time | 650 ps |
| Family | 10E |
| Current - Quiescent (Iq) | 125mA |
| Halogen Free | Halogen Free |
| Trigger Type | Positive Edge |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 6 |
| Count Direction | RIGHT |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000000Hz |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10EP451MNR4G Overview
It is embeded in 32-VFQFN Exposed Pad case. D flip flop is included in the Tape & Reel (TR)package. It is configured with Differentialas an output. This trigger is configured to use Positive Edge. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of -3V~-5.5V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. It belongs to the 10EPseries of FPGAs. You should not exceed 3GHzin the output frequency of the device. A total of 1 elements are present. There is 125mA quiescent consumption. In 32terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 10EP451. Power is supplied from a voltage of 3.3V volts. In terms of electronic devices, this device belongs to the 10Efamily of devices. The electronic part is mounted in the way of Surface Mount. 32pins are included in its design. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device has the base part number Shift Registers. It is designed with 6bits. 5.5Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 3V. In order for the device to operate, it requires -5.2V power supplies. Currently, there are 6 lines of input. In addition, you can refer to the additinal NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V of the D latch. A -50mAis set for the high level output current. There is 50mA output current at the low level.
MC10EP451MNR4G Features
Tape & Reel (TR) package
10EP series
32 pins
6 Bits
-5.2V power supplies
MC10EP451MNR4G Applications
There are a lot of ON Semiconductor MC10EP451MNR4G Flip Flops applications.
- Safety Clamp
- Memory
- ATE
- Asynchronous counter
- Reduced system switching noise
- Consumer
- Storage registers
- Computers
- Buffered Clock
- Synchronous counter
