MC10EP51MNTAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 10EP |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 10EP51 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Bits | 1 |
| Clock Frequency | 3GHz |
| Propagation Delay | 350 ps |
| Turn On Delay Time | 320 ps |
| Family | 10E |
| Current - Quiescent (Iq) | 45mA |
| Halogen Free | Halogen Free |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.42 ns |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 47mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000000Hz |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EP51MNTAG Overview
8-VFDFN Exposed Padis the way it is packaged. A package named Tape & Reel (TR)includes it. T flip flop is configured with an output of Differential. The trigger configured with it uses Positive, Negative. This electronic part is mounted in the way of Surface Mount. A supply voltage of -3V~-5.5V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. The type of this D latch is D-Type. FPGAs belonging to the 10EPseries contain this type of chip. A frequency of 3GHzshould be the maximum output frequency. D latch consists of 1 elements. It consumes 45mA of quiescent current without being affected by external factors. There are 8 terminations,If you search by 10EP51, you will find similar parts. The D flip flop is powered by a voltage of 3.3V . An electronic device belonging to the family 10Ecan be found here. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 8. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part with 1bits has been designed. Vsup reaches 5.5V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be kept above 3V. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. It operates from -5.2V power supplies.
MC10EP51MNTAG Features
Tape & Reel (TR) package
10EP series
8 pins
1 Bits
-5.2V power supplies
MC10EP51MNTAG Applications
There are a lot of ON Semiconductor MC10EP51MNTAG Flip Flops applications.
- ESD performance
- Test & Measurement
- High Performance Logic for test systems
- ESCC
- Latch
- Memory
- Individual Asynchronous Resets
- Data storage
- Data transfer
- Shift Registers
