MC10EP52DTR2G
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP52 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 3GHz |
| Propagation Delay | 380 ps |
| Turn On Delay Time | 330 ps |
| Family | 10E |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 45mA |
| Halogen Free | Halogen Free |
| Trigger Type | Positive, Negative |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 47mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 4000000000Hz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
MC10EP52DTR2G Overview
It is packaged in the way of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). You can find it in the Tape & Reel (TR)package. It is configured with Differentialas an output. In the configuration of the trigger, Positive, Negativeis used. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of -3V~-5.5V volts. In this case, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. The 10EPseries comprises this type of FPGA. A frequency of 3GHzshould be the maximum output frequency. It consumes 45mA of quiescent current without being affected by external factors. Terminations are 8. The 10EP52 family contains it. A voltage of 3.3V is used as the power supply for this D latch. Electronic devices of this type belong to the 10Efamily. The electronic part is mounted in the way of Surface Mount. It is designed with 8 pins. Its clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. Flip flops designed with 1bits are used in this part. As soon as 5.5Vis reached, Vsup reaches its maximum value. It is imperative that the supply voltage (Vsup) is maintained above 3Vin order to ensure normal operation. The superior flexibility of this circuit is achieved by using 1 circuits. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. It operates from -5.2V power supplies. Furthermore, it has NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vas a characteristic. It is set to -50mAfor the high level output current. It is set to 50mAfor the low level output current.
MC10EP52DTR2G Features
Tape & Reel (TR) package
10EP series
8 pins
1 Bits
-5.2V power supplies
MC10EP52DTR2G Applications
There are a lot of ON Semiconductor MC10EP52DTR2G Flip Flops applications.
- Single Up Count-Control Line
- Cold spare funcion
- Common Clocks
- Pattern generators
- Event Detectors
- Set-reset capability
- Memory
- Individual Asynchronous Resets
- Computing
- Registers
