MC10EP52MNR4G
| Parameters | |
|---|---|
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 47mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 4000000000Hz |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 10EP |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP52 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 3GHz |
| Propagation Delay | 380 ps |
| Turn On Delay Time | 330 ps |
| Family | 10E |
| Current - Quiescent (Iq) | 45mA |
| Halogen Free | Halogen Free |
| Trigger Type | Positive, Negative |
| High Level Output Current | -50mA |
MC10EP52MNR4G Overview
The flip flop is packaged in 8-VFDFN Exposed Pad. A package named Tape & Reel (TR)includes it. As configured, the output uses Differential. It is configured with a trigger that uses Positive, Negative. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of -3V~-5.5V volts, it operates. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 10EP series. A frequency of 3GHzshould be the maximum output frequency. T flip flop consumes 45mA quiescent energy. A total of 8 terminations have been made. The 10EP52family includes it. A voltage of 3.3V provides power to the D latch. An electronic device belonging to the family 10Ecan be found here. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 8. This device has the clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. There are 1bits in its design. Vsup reaches its maximum value at 5.5V. A normal operating voltage (Vsup) should remain above 3V. The superior flexibility is achieved through the use of 1 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. It operates from -5.2V power supplies. Additionally, there are NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V on the electronic flip flop that can be referred to. It is set to -50mAfor the high level output current. There is no low level output current set at 50mA.
MC10EP52MNR4G Features
Tape & Reel (TR) package
10EP series
8 pins
1 Bits
-5.2V power supplies
MC10EP52MNR4G Applications
There are a lot of ON Semiconductor MC10EP52MNR4G Flip Flops applications.
- Instrumentation
- CMOS Process
- Storage Registers
- Set-reset capability
- Buffer registers
- Counters
- Memory
- Pattern generators
- Communications
- Data Synchronizers
