MC10EP56DT
| Parameters | |
|---|---|
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 470 ps |
| Quiescent Current | 63mA |
| Turn On Delay Time | 500 ps |
| Family | 10E |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 4 |
| Output Characteristics | SERIES-RESISTOR |
| Supply Type | Dual |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 78mA |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 10EP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP56 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Circuit | 2 x 2:1 |
MC10EP56DT Overview
In order to save board space, digital switch is located in the 20-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tube.For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC Differential Digital Multiplexer is used.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a ±3V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers in the 10EP series are suitable for a wide range of applications.It is designed with 20 terminations as part of its basic configuration.There is a base part number 10EP56 that can be used to locate signal switch's related components as well.In multiplexer's system, 3.3V is the voltage supplied.In this turn signal switch, there are 20 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a supply type of Dual employed as part of this supply.It is configured with 20 pins.It is mounted in the way of Surface Mount.The logic switch is a member of the family of 10E.Keeping Vsup at 3V will prevent some unwanted failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.As a result, the turn signal switch consists of 1 outputs.This is a signal switch that is categorized as Multiplexer/Demultiplexers.Without external influences, it consumes 63mA current of multiplexer ic.This multiplexer has a total of 4 inputs.In accordance with RAIL, switches can be packaged.In addition, NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V exhibits improved characteristics.It is necessary for the digitalswitch to operate normally that 2 circuits be formed.
MC10EP56DT Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC10EP56DT Applications
There are a lot of ON Semiconductor MC10EP56DT Signal Switches / Multiplexers / Decoders applications.
- Image transmission
- Data collection system
- Data demultiplexing
- HDMI applications
- Injectors
- VGA
- Telephone network
- Medium scale TV wall
- Memory system of computers
- War field flying robot with a night vision flying camera
