Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2005 |
Series |
10EP |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Type |
Differential Digital Multiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
Packing Method |
RAIL |
Technology |
ECL |
Voltage - Supply |
±3V~5.5V |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
10EP56 |
Pin Count |
20 |
Number of Outputs |
1 |
Circuit |
2 x 2:1 |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
3V |
Throw Configuration |
DPST |
Propagation Delay |
470 ps |
Turn On Delay Time |
500 ps |
Family |
10E |
Logic Function |
Multiplexer |
Number of Inputs |
4 |
Max Input Voltage |
2.48V |
Output Characteristics |
SERIES-RESISTOR |
Halogen Free |
Halogen Free |
Supply Type |
Dual |
Output Polarity |
COMPLEMENTARY |
High Level Output Current |
-50mA |
Low Level Output Current |
50mA |
Power Supply Current-Max (ICC) |
78mA |
Number of Input Lines |
2 |
Voltage Supply Source |
Dual Supply |
Independent Circuits |
1 |
Height |
1.05mm |
Length |
6.6mm |
Width |
4.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC10EP56DTG Overview
As a means of saving space, digital switch is provided in the 20-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tube.Digital switch ic adheres to a mounting method of Surface Mount.As the analog part, the circuit uses an analog IC Differential Digital Multiplexer.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a ±3V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.With the 10EP series, the multiplexers are suitable for a diverse range of applications.Among its basic configurations are 20 terminations.As its base part number is 10EP56, logic switch can also be used to find its related parts.In multiplexer's system, 3.3V is the voltage supplied.Currently, this turn signal switch has a total of 20 component pins.As a result, conductors end at GULL WING.In this case, Dual is employed as the supply type.Currently, it is configured with 20 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch belongs to the family of 10E.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 3V.The maximal supply voltage (Vsup) should be kept at 5.5V to avoid some unnecessary failures.The turn signal switch has 1 outputs designed for operation.This multiplexer has 4 inputs.Currently, the switches is packaged in accordance with the RAIL method.Voltage levels are accepted through 2 input lines of multiplexers.In addition, it provides improved features of NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V.
MC10EP56DTG Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
2 input lines
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC10EP56DTG Applications
There are a lot of ON Semiconductor MC10EP56DTG Signal Switches / Multiplexers / Decoders applications.
- Analog, digital or video signal switching
- Microprocessor input/output systems
- Make half adder
- War field flying robot with a night vision flying camera
- Injectors
- Enabling different rows of memory depending on address in memory chips
- Code converters
- Encrypted communications system
- Speed control of medern motors
- HDMI applications