banner_page

MC10EP56MNG

20 Terminations±3V~5.5V 20 Pin 10EP56 Signal switch10EP Series 2 Functions


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC10EP56MNG
  • Package: 20-VFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 532
  • Description: 20 Terminations±3V~5.5V 20 Pin 10EP56 Signal switch10EP Series 2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-VFQFN Exposed Pad
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tube
Published 2005
Series 10EP
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Type Differential Digital Multiplexer
Terminal Finish Tin (Sn)
Additional Feature NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
Subcategory Multiplexer/Demultiplexers
Packing Method RAIL
Technology ECL
Voltage - Supply ±3V~5.5V
Terminal Position QUAD
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Base Part Number 10EP56
Pin Count 20
Circuit 2 x 2:1
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 3V
Propagation Delay 470 ps
Turn On Delay Time 500 ps
Family 10E
Logic Function Multiplexer, Mux
Output Characteristics SERIES-RESISTOR
Halogen Free Halogen Free
Supply Type Dual
Output Polarity COMPLEMENTARY
High Level Output Current -50mA
Low Level Output Current 50mA
Power Supply Current-Max (ICC) 78mA
Number of Input Lines 4
Voltage Supply Source Dual Supply
Independent Circuits 1
Number of Output Lines 2
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MC10EP56MNG Overview


Digital switch is provided in the 20-VFQFN Exposed Pad for the purpose of saving board space.It is packaged according to the Tube method.The method digital switch ic adopts for mounting is Surface Mount.Differential Digital Multiplexer is the analog IC that the multiplexers uses.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Using a ±3V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 10EP series can be used for a wide range of applications.The basic configuration includes 20 terminations.To find signal switch's related components, a base part number of 10EP56 may also be used.In this case, 3.3V is the voltage supplied to the multiplexer's system.A component pin count of 20 is found on this turn signal switch.Dual is used as its supply type.With 20 pins, it is configured.The mounting point is Surface Mount.The logic switch is included into the family of 10E.It is recommended that the minimum supply voltage (Vsup) be kept at 3V so that unnecessary failures can be prevented.Keeping Vsup at 5.5V will prevent some unnecessary failures.This is an the digital switch ic that is classified as Multiplexer/Demultiplexers.The switches package is packaged in a way which is consistent with RAIL.The multiplexers have 4 input lines used to accept voltage levels.A signal source is provided by 2 output lines.Additionally, NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V has improved characteristics.

MC10EP56MNG Features


Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Dual
4 input lines
2 output lines
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V

MC10EP56MNG Applications


There are a lot of ON Semiconductor MC10EP56MNG Signal Switches / Multiplexers / Decoders applications.

  • Data communication
  • Automatic Monitoring systems
  • Video transmission
  • Medium scale TV wall
  • Night vision cameras
  • Electronics industry
  • Recording transmission
  • Frequency multiplexing system
  • To select different devices in microprocessor input
  • D/A converters

Write a review

Note: HTML is not translated!
    Bad           Good